|
|
| MikroTik RB11 |
 |
| €14.29 | |
|
|
| - Convert Mini PCI to PCI Slot | | - PCI v2.1 and v2.2 compliant | | - Bracket for RP-TNC Connector | | - Ideal For Wwireless Cards |
|
|
| Stock |
 |
| | NIC Card |
|  | | Card Requirements | | Available PCI slot (PCI-system 2.1 or higher) |
| | | Dimensions | | 9,6 x 14cm (3,78 x 5,51in) |
| | | Electrical | | 5v standard PCI support; 3.3v only option (must order IN/EM4 - 3.3) |
| | | LEDs | | Two LEDs connected to each MiniPCI (according to standards) |
| | | Mechanical Mountings | | Mounting for optional tin shield for two slots |
| | | Mini PCI Slots | | 1 x MiniPCI v1.0 standard compliant |
| | | Operating Humidity | | 0% to 90% (non Condensing) |
| | | Operating Temp | | 0° C to 70° C (32°F to 158°F) |
| | | Operation Voltage | | PCI 3.3v and 5v support optional - 3.3v only support (factory option RouterBOARD 14-3.3) |
| | | PCi Brackets | | Optional TNC Punch outs for Tnc Pigtails to radio cards |
| | | PCI Standard | | PCI v2.1 and v2.2 compliant transparent PCI bridge (no drivers needed) |
| | | Power Supply / Transfer | | Up to 2.5w of 3.3v power supplied to each Mini PCI card |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD (Transparent) |
| |
|
|
|
| MikroTik RB11E |
 |
| €14.29 | |
|
|
| - Mini PCI Express to PCI Express | | - 10W to PCI Express Slot | | - TNC PigTail mounting plate | | - RF Shielding plate |
|
|
| Stock |
 |
| | NIC Card |
| | | Card Requirements | | Available PCIe slot |
| | | | | LEDs | | Three LEDs connected to each MiniPCI (according to standards) |
| | | Mini PCI Slots | | One PCI Express Mini Card Slot for a 52 pin card |
| | | Operating Humidity | | 0% to 90% (non Condensing) |
| | | Operating Temp | | 0° C to 70° C (32°F to 158°F) |
| | | Operation Voltage | | PCIe 3.3V |
| | | PCI Standard | | PCI Express x1 (PCIe) PCI Express Single Lane, doesn\'t support USB connectivity |
| | | Power Supply / Transfer | | Up to 10W supplied to PCI Express Mini card |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD (Transparent) |
| |
|
|
|
| MikroTik RB14 |
 |
| €42.21 | |
|
|
| - PCI v2.1 and v2.2 Compliant | | - 2.5w of 3.3v Power per Port | | - 4 x MiniPCI v1.0 standard | | - Two LEDs for each MiniPCI |
|
|
| Stock |
|
| | NIC Card |
| | | Card Requirements | | Available PCI slot (PCI-system 2.1 or higher) |
| | | Dimensions | | 9,6 x 14cm (3,78 x 5,51in) |
| | | Electrical | | 5v standard PCI support; 3.3v only option (must order IN/EM4 - 3.3) |
| | | LEDs | | Two LEDs connected to each MiniPCI (according to standards) |
| | | Mechanical Mountings | | Mounting for optional tin shield for two slots |
| | | Mini PCI Slots | | 4 x MiniPCI v1.0 standard compliant |
| | | Operating Humidity | | 0% to 90% (non Condensing) |
| | | Operating Temp | | 0° C to 70° C (32°F to 158°F) |
| | | Operation Voltage | | PCI 3.3v and 5v support optional - 3.3v only support (factory option RouterBOARD 14-3.3) |
| | | PCi Brackets | | Optional TNC Punch outs for Tnc Pigtails to radio cards |
| | | PCI Standard | | PCI v2.1 and v2.2 compliant transparent PCI bridge (no drivers needed) |
| | | Power Supply / Transfer | | Up to 2.5w of 3.3v power supplied to each Mini PCI card |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD (Transparent) |
| |
|
|
|
| MikroTik RB44 |
 |
| €53.84 | |
|
|
| - Additional Interfaces | | - Four 10/100 Mbps Ethernet Ports | | - 5v Standard PCI Support | | - VIA VT6105M (VIA Rhine III ) |
|
|
| Stock |
 |
| | NIC Card |
| | | Architecture | | PCI specification revision 2.2 compliant; PCI-to-PCI Bridge; 32-bit PCI Bus Master |
| | | Cable Length | | Supports 150 m Ethernet cabling |
| | | Card Requirements | | Available PCI slot (PCI-system 2.1 or higher) |
| | | Chipset | | VIA Technologies VT6105M (VIA Rhine III chip) |
| | | Compatability | | IEEE 802.3 10BaseT; IEEE 802.3u 100BaseTX Fast Ethernet; VLAN 802.1q |
| | | Electrical | | 5v standard PCI support; 3.3v only option (must order IN/EM4 - 3.3) |
| | | External Output | | Four RJ-45 LAN ports |
| | | MDI/X | | MDI/X: cross/straight cable auto detection |
| | | | | Ports | | 10/100Mbps with four auto-sensing half/full duplex RJ-45 ports |
| | | Recognition | | Recognized as four independent Ethernet ports |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD |
| |
|
|
|
| MikroTik RB44G 4 Port Network Card |
 |
| €62.73 | |
|
|
| - 10/100/1000 Mbps Gigabit Ethernet | | - Realtek 8169SC | | - Auto MDI/X Support | | - PCI-system 2.1 or higher |
|
|
| Stock |
|
| | NIC Card |
| | | Architecture | | PCI specification revision 2.2 compliant; PCI-to-PCI Bridge; 32-bit PCI Bus Master |
| | | Cable Length | | Supports 100 m Ethernet cabling |
| | | Card Requirements | | Available PCI slot (PCI-system 2.1 or higher) |
| | | | | Compatability | | IEEE 802.3 10BaseT; IEEE 802.3u 100BaseTX Fast Ethernet; IEEE 802.3z Gigabit Ethernet; VLAN 802.1q |
| | | Dimensions | | 107 x 124 x 19 mm |
| | | Electrical | | 5v standard PCI support; 3.3v only option (must order IN/EM4 - 3.3) |
| | | External Output | | Four RJ-45 LAN ports |
| | | MDI/X | | MDI/X: cross/straight cable auto detection |
| | | | | Ports | | 10/100/1000Mbps with four auto-sensing half/full duplex RJ-45 ports |
| | | Recognition | | Recognized as four independent Ethernet ports |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD |
| |
|
|
|
| MikroTik RB44GV 4 Port Network Card |
 |
| €66.23 | |
|
|
| - VIA VT6122 Gigabit Ethernet Chipset | | - MDI/X Auto-cross/Straight upport | | - 4 X 10/100/1000Mbps Ports | | - PCI-System 2.1 or Higher |
|
|
| Stock |
|
| | NIC Card |
| | | Architecture | | PCI specification revision 2.2 compliant; PCI-to-PCI Bridge; 32-bit PCI Bus Master |
| | | Cable Length | | Supports 100 m Ethernet cabling |
| | | Card Requirements | | Available PCI slot (PCI-system 2.1 or higher) |
| | | | | Compatability | | IEEE 802.3 10BaseT; IEEE 802.3u 100BaseTX Fast Ethernet; IEEE 802.3z Gigabit Ethernet; VLAN 802.1q |
| | | Dimensions | | 107 x 124 x 19 mm |
| | | Electrical | | 3.3v option (must order IN/EM4 - 3.3) |
| | | External Output | | Four RJ-45 LAN ports |
| | | MDI/X | | MDI/X: cross/straight cable auto detection |
| | | Operating Temp | | 0° to 50°C |
| | | Ports | | 10/100/1000Mbps with four auto-sensing half/full duplex RJ-45 ports |
| | | Recognition | | Recognized as four independent Ethernet ports |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD Windows XP Embedded, Windows XP Embedded SP2, Windows XP 64-Bit, Linux XFree86 (Not distribution-specific), Windows 98, Windows 98SE, Windows 2000, Windows ME, W |
| |
|
|
|
| MikroTik RB18 |
 |
| €75.32 | |
|
|
| - Converting PCI to Mini PCI | | - Advanced Eight-Slot Adapter | | - Up to 2.5w of 3.3v Power | | - RF Shielding Plate |
|
|
| Stock |
|
| | NIC Card |
| | | Card Requirements | | Available PCI slot (PCI-system 2.1 or higher) |
| | | Dimensions | | 9,6 x 14cm (3,78 x 5,51in) |
| | | Electrical | | 5v standard PCI support; 3.3v only option (must order IN/EM4 - 3.3) |
| | | LEDs | | Two LEDs connected to each MiniPCI (according to standards) |
| | | Mechanical Mountings | | Mounting for optional tin shield for two slots |
| | | Mini PCI Slots | | 8 x MiniPCI v1.0 standard compliant |
| | | Operating Humidity | | 0% to 90% (non Condensing) |
| | | Operating Temp | | 0° C to 70° C (32°F to 158°F) |
| | | Operation Voltage | | PCI 3.3v and 5v support optional - 3.3v only support (factory option RouterBOARD 14-3.3) |
| | | PCi Brackets | | Optional TNC Punch outs for Tnc Pigtails to radio cards |
| | | PCI Standard | | PCI v2.1 and v2.2 compliant transparent PCI bridge (no drivers needed) |
| | | Power Supply / Transfer | | Up to 2.5w of 3.3v power supplied to each Mini PCI card |
| | | Supported OS | | MikroTik RouterOS, Windows, Linux, BSD (Transparent) |
| |
|
|
|
| Intel Pro1000 Dual Port Server Adapter |
 |
| €100.00 | |
|
|
| - Multi-Gigabit Scalability | | - Support for most NOSs | | - Support for WfM, RIS, SNMP/DMI | | - Compatible with Intel® PRO/1000 |
|
|
| Stock |
|
| | NIC Card |
| | | Advanced Software Features | | Adapter Fault Tolerance Switch Fault Tolerance Adaptive Load Balancing Fast EtherChannel*1 Gigabit EtherChannel*1 IEEE 802.3ad (Link Aggregation Control Test Switch Configuration PCI Hot Plug* a |
| | | Architecture | | PCI specification revision 2.2 compliant; PCI-X 32-bit PCI 64-Bit PCI Supported 33MHz,66MHz,100MHz, 133MHz Bus Frequencies Bus Master Supported |
| | | Cable Length | | Supports 100 m Ethernet cabling |
| | | | | Chipset | | Intel® 82546 Gigabit Controller (Dual Intel Pro 1000 MT Server Adapter ) |
| | | Compatability | | IEEE 802.3 10BaseT; IEEE 802.3u 100BaseTX Fast Ethernet; IEEE 802.3z Gigabit Ethernet; VLAN 802.1q |
| | | Dimensions | | Length= 16.5cm (6.6 in) Width= 6.4cm (2.5 in) PCI Bracket Length= 124 x 19 mm |
| | | External Output | | 2 RJ-45 LAN ports |
| | | Management Features | | Wired for Management (WfM) Baseline v2.0 Enabled for Servers DMI 2.0 Support, WMI & SNMP-manageable Offline Diagnostics Dynamic Cable Diagnostics Intel® Boot Agent ACPI Power Management Wake |
| | | MDI/X | | MDI/X: cross/straight cable auto detection |
| | | | | Ports | | 10/100/1000Mbps with 2 auto-sensing half/full duplex RJ-45 ports |
| | | Power Consumption | | 1A at +5VDC (5W) |
| | | Recognition | | Recognized as 2 independent Ethernet ports ( however using Intel ANS Software the Interfaces can be Combined into a virtual Adapter Team |
| | | Supported OS | | MikroTik RouterOS, Microsoft Windows Server 2008, 2003 & 2000 Microsoft Windows XP 32- and 64-bit Editions Microsoft Windows NT* 4.0 Linux 2.4.x or later |
| |
|
|
|
|
|
|
